Runway Mapping

Don’t think this has been asked about so here it is.
Wondering if you’d be able to set which runway a gate can be set to.
Example being this, in this airport shown below, there is 2 runways, 36L & 36R. Would it be possible to set all the gates to the right of the terminal to Runway 36R, and set all the gates to the left to runway 36R

The stands check their runway connection. A flight will not land on the wrong runway for your setup.

1 Like

@dewitjur is right. Aircraft will only land on runways that are connected to the stands they must go to.